Clé sécurisée MASTER LOCK, moyenne 85 x 119 x 36 mm, extérieur, montage • EUR 22,97 (2024)

FAQs

How old is my Master Lock? ›

If there is a date or serial number printed on the lock, that is one of the best ways to tell when it was made. Every Master lock has a unique serial number, so a qualified locksmith should be able to help you date it.

If your lock has a serial number, you can recover your combination in one of three ways. You can visit a Master Lock Distributor / Retailer or submit a Lost Combination form. Bring your lock to the retailer. Be sure that it is not attached to anything.

Almost all of the company's locks are known to have serious security flaws, which allow for easy bypass through lock picking or bump keys or other forms of bypassing. This is because the locks mostly contain standard cylindrical pins, with no, or poorly made, serrated or spool driver pins.

A: Resetting a key lock box without the code can be challenging, as it typically requires access to the existing code or special tools. In such cases, it is recommended to contact the lock box manufacturer or distributor for guidance on resetting the lock box.

If you don't have a key to reference, then another option is knowing your key number to place a special order via a authorized distributor. If both are not an option, then contacting a locksmith to open or remove your lock would be your resolution.

Unfortunately no. You cannot reset this lock without knowing the current combination. You'll likely need to purchase a new lock.

In a Master Keyed system, a master key opens all the locks in the system although each lock also has its own unique key. This permits organizing master key systems along departmental or other functional lines to allow supervisory or emergency access.

A) My lock does not have a serial number: To provide enhanced long–term security, Master Lock has discontinued imprinting a serial number on the lock body on combination locks sold through retail locations.

The No.

1 uses a laminated padlock body with an internal key-in-knob-style cylinder. The inner cylinder uses four pin stacks and does not use any security pins. The No. 1 is one of the most common low security padlocks used in the United States.

Is Master Lock made in the USA? ›

After outsourcing much of its production in the 1990s, Master Lock has become a twenty-first century example of repatriating manufacturing to the United States. In 1921, Harry Soref, with investments from two friends, founded the Master Lock Company.

Schlage was rated the most trustworthy brand, achieving the highest Net Trust Quotient score (119.7) among the most popular door lock and hardware brands.

The simplest solution is to reset the code. Depending on the manufacturer and type of safe, you may be able to enter an override code, or your locksmith may be able to access a reset switch inside the safe with a special tool. If there is no way to override the code, you may be able to “bounce” the safe.

Insert a screwdriver into the keyhole and turn it to break the lock. Place the safe on a flat surface and insert a flathead screwdriver into the keyhole. Rotate the screwdriver counterclockwise over and over until you hear or feel the locking mechanism break open. Then, remove the screwdriver and open the safe.

All Master Lock mechanical locks, including the following, are covered by a Limited Lifetime Warranty: Padlocks. 2 Wheels Locks. Cables & Chains.

Gerolamo Cardano later described a combination lock in the 16th century. Linus Yale, Jr. contributed the first modern style rotary combination locks in the early 1870s. In 1878, Joseph Loch (Germany) modified Yale's design for Tiffany's Jewelers in New York City.

1921. Master Lock was founded by Harry Soref.